Do you have any further questions?
Call us or send us an email:
- +49 (0)9401 5399470
- info@3dbavaria.com
Max. building space:
300 x 300 x 600 mm
Tolerances:
± 0,5% (min. ± 0,3 mm)
Costs:
€ € €
Delivery time:
from 1 working day
This material is based on a biopolymer and is therefore both food safe and compostable as well as Co2 verified. It is ideal for technical and mechanical applications, as its slight flexibility results in very high impact strength. The property profile is rounded off by temperature resistance and a slightly matt surface, which makes the individual layers less visible.
Look and feel:
With the FDM process, the individual print layers (usually 0.1-0.3 mm), or process paths of the print nozzle, are clearly visible on the parts. In addition, support structures are often necessary for printing, which must be removed afterwards and can have an impact on the surface quality.
Technical documents:
Test | Value | Method |
---|---|---|
Tensile E-modulus | 4300 MPa | ISO 527 |
Tensile strength | 58 MPa | ISO 527 |
Tensile elongation | 2.8 % | ISO 527 |
Breaking tension | 53 MPa | ISO 527 |
Notch impact strength | 4 kJ/m2 | ISO 179/1eA |
VICAT softening temperature | 160°C (min. 4mm) | ISO 306 |
The comparatively inexpensive but extremely flexible FDM process impresses with a huge selection of materials as well as large installation spaces ( with us, for example, up to 1,000 x 500 x 500 mm).
ABS is the most widely used plastic in the world. It is characterized by a high level of heat resistance and very good post-processing options.
The PLA, made from renewable raw materials, is characterized by its high tensile strength. It is particularly suitable for prototypes and bulky parts.
ASA is the ABS for outdoors. The property profile is similar, but ASA has a higher heat resistance and is more resistant to UV radiation.
This plastic combines the best properties of ABS and PLA. It is tougher than ABS, more heat resistant than PLA, UV stable and resistant to many chemicals.
The carbon fiber-reinforced PA6/66 is highly resistant to external influences and particularly good for robust parts that have to meet higher mechanical requirements.
Polycarbonate (PC) is an extremely tough material. It has a high temperature resistance, which is e.g. ideal for technical housings.
ESD ABS is ideal for critical applications that require a high level of protection against electrostatic discharges, such as electrical enclosures or packaging.
With an elasticity of up to 480%, high chemical resistance and heat resistance up to 140°C, the material is suitable for industrial applications.